Protect Your Storage Tanks with Advanced Waterproofing Solutions by ATM Tanks

Home - Storage Tanks - Protect Your Storage Tanks with Advanced Waterproofing Solutions by ATM Tanks
waterproof storage tanks

Above-ground storage tanks are integral components of a wide range of industries, often containing valuable resources like water, chemicals, and fuels. A critical aspect of ensuring the longevity and structural integrity of these tanks is the implementation of effective waterproofing methods that deliver long-lasting protection against leaks, corrosion, and other waterborne threats. Adequate waterproofing not only safeguards your tanks and their contents but also helps prevent costly repairs, environmental damage, and potential legal liabilities arising from leaks and spills.

In this comprehensive guide, we will delve into the significance of waterproofing your above-ground storage tanks, outlining the various methods and techniques available, including liquid-applied membranes, sheet membranes, and tank liners. Moreover, we will discuss the factors to consider when selecting the most appropriate solution and share crucial best practices for the installation and maintenance of each waterproofing method. By understanding and employing the correct waterproofing strategies, you can ensure the safety, performance, and long-term durability of your valuable tank infrastructure.

Waterproofing Challenges for Above-Ground Storage Tanks

Above-ground storage tanks face numerous challenges when it comes to maintaining a watertight environment. Some challenges include:

1. External Moisture: Tanks can be exposed to moisture through rainwater, groundwater, and condensation. This can lead to the corrosion of tank materials and the weakening of seams and joints, increasing the risk of leaks and subsequent damage.

2. Chemical Resistance: Tanks containing corrosive contents, such as chemicals or wastewater, necessitate adequate waterproofing solutions resistant to both the stored substances and potential chemical reactions.

3. Temperature Variations: Fluctuations in temperature can cause expansion and contraction of tank materials and waterproofing systems, potentially leading to cracks, breaches, and leaks if not addressed through proper waterproofing methods.

4. Regulatory Compliance: Stringent industry regulations and environmental protection standards highlight the significance of employing waterproofing solutions that meet necessary requirements and inspections.

Key Waterproofing Methods for Storage Tanks

To effectively address these challenges, several waterproofing methods and materials are available for above-ground storage tanks:

1. Liquid-Applied Membranes: These waterproofing systems involve the application of a liquid coating––typically polymer or bitumen-based––that cures to form a seamless, durable, and elastic membrane. Liquid-applied membranes can be applied using rolling, brushing, or spraying techniques.

2. Sheet Membranes: As pre-formed sheets, these waterproofing solutions are available in various materials, such as PVC, TPO, and EPDM. Sheet membranes require adhesive or heat welding to secure seams and create a continuous membrane on the tank surface.

3. Tank Liners: Tank liners provide a versatile, protective barrier inside the tank, available in materials such as PVC, polyethylene, and reinforced polypropylene. Liners can be custom-fitted or prefabricated to suit the unique shape and requirements of your storage tank.

Factors to Consider When Selecting a Waterproofing Solution

Consider the following factors when selecting the most suitable waterproofing method for your above-ground storage tank:

1. Tank Material and Contents: The type and composition of your tank material, as well as the substances stored within it, should guide your choice of waterproofing solutions. Ensure the selected method is compatible with both the tank material and the stored contents, preventing adverse reactions or material degradation.

2. Environmental Conditions: Take into account the surrounding environmental conditions, such as moisture, temperature, and exposure to sunlight. Choose an appropriate waterproofing method that adequately addresses these factors and is designed for durability under such conditions.

3. Budget and Maintenance: Evaluate the costs associated with purchasing, installing, and maintaining various waterproofing solutions, selecting an option that aligns with your budget and long-term maintenance goals.

4. Accessibility and Installation: Some waterproofing methods and materials may be more straightforward to install than others based on factors like tank location, size, and configuration. Consider the ease of installation and necessary resources, such as labour and equipment, when making your choice.

5. Regulatory Compliance: Ensure your chosen waterproofing solution complies with applicable industry standards and regulations, mitigating risks of non-compliance, fines, and potential liability.

Best Practices for Waterproofing Installation and Maintenance

To ensure the successful implementation and maintenance of your tank’s waterproofing solution, adhere to the following best practices:

1. Clean and Prepare Surfaces: Prior to installing any waterproofing system, ensure the tank surface is clean, dry, and free of debris or contaminants. This condition facilitates proper adhesion and optimal waterproofing performance.

2. Professional Installation: Engage the services of reputable waterproofing professionals, like ATM Tanks, to ensure a proper, thorough installation. Well-executed installations increase the longevity and performance of waterproofing systems.

3. Inspections and Maintenance: Schedule regular tank inspections to identify any compromised areas or damages to the waterproofing system. Address potential issues swiftly to maintain the integrity of the waterproofing membrane and the tank itself.

4. Follow Manufacturer Guidelines: Adhere to the manufacturer’s recommendations for maintenance, repair, and reapplication of your chosen waterproofing solution to ensure its continued effectiveness.

Conclusion

Ensuring your above-ground storage tanks remain watertight and protected is crucial for maintaining the safety, performance, and longevity of your tank infrastructure. By understanding the challenges faced by storage tanks, examining available waterproofing methods, considering vital factors, and adhering to best practices, you can make informed decisions that effectively protect your tanks and their valuable contents for years to come.
Partner with ATM Tanks to secure tailored tank waterproofing solutions designed to meet your above-ground storage tank requirements. Contact our team of skilled professionals today to discover how our comprehensive expertise, advanced waterproofing technology, and unwavering commitment to client satisfaction can provide you with a lasting, watertight solution that safeguards your tank facility and resources.

Aaron James
Follow me

About The Author

Aaron James
Aaron has been working at ATM Tanks for the past 5 years. He has completed a wide range of projects across Australia including new tank builds, cleaning and servicing existing tanks and countless tank inspections. However he has excelled recently at project management for ATM Tanks.

Leave A Comment

RECENT NEWS

CONTACT US

Find Us On Facebook

ATM Tanks Australia, Liners, Repairs And Inspections
ATM Tanks Australia, Liners, Repairs And Inspections24 hours ago
When your tank is down, your operations shouldn’t be.

At ATM Tanks, we specialise in restoring damaged water tanks to their original strength and performance.

Our repair process is more than a patch-up – it's a precision job backed by expertise, ensuring you get the same level of satisfaction and reliability as before.

We believe in maintaining quality, extending lifespan, and restoring full operational confidence.

🔧 Trusted repair services
💧 Industry-grade workmanship
✅ Built to last, built to perform

ATM Tanks – restoring reliability, one tank at a time.

#ATMTanks #WaterTankRepair #AssetRestoration #IndustrialMaintenance #TankSpecialists #AustralianEngineering #InfrastructureCare #BuiltToLast #RepairExcellence #TankIntegrity
ATM Tanks Australia, Liners, Repairs And Inspections
ATM Tanks Australia, Liners, Repairs And Inspections3 days ago
How old is your fire water tank, and when was it last checked?

If you can’t remember, it might be time for a service.

🔥 A yearly inspection isn’t just ticking a box – it’s peace of mind.

Steel tanks, no matter how tough, will eventually cop a bit of wear, leaks, or even rust over time.

That’s why we recommend getting it checked once a year, to keep your system fire-ready and up to scratch.

When the fire hits, your tank needs to be up to the job – no excuses.

✅ Stay compliant

✅ Spot issues before they become a drama

✅ Save lives, property, and assets

ATM Tanks – keeping your tanks ready to roll, 365 days a year.

#ATMTanks #FireWaterTank #TankInspections #FireSafetyFirst #AnnualMaintenance #AussieCompliance #WaterTankSafety #BuiltToProtect #IndustrialSafety #OutbackReadiness
ATM Tanks Australia, Liners, Repairs And Inspections
ATM Tanks Australia, Liners, Repairs And Inspections4 days ago
Before the world wakes – the work begins.

This is what a sunrise looks like in the Australian Outback.
Far from city lights, our team stands ready at a remote mine site – focused, prepared, and driven.

Every early start is more than a routine – it’s a reflection of dedication, discipline, and pride in what we build.

At ATM Tanks, we take pride in showing up, standing tall, and delivering quality where it matters most – even before the sun’s fully risen.

Remote conditions. Rugged environments. Relentless standards.
That’s the ATM way.

#ATMTanks #MineSiteProjects #OutbackOperations #EarlyShift #SunriseWorkforce #RemoteTeamwork #AustralianIndustry #LeadershipInTheField #InfrastructureAustralia #BuiltToEndure
error: Content is protected !!
Call Now Button